RC Brushless ESC 80A UBEC 2S-6S Electronic Speed Controller with BEC DIY Module for RC Airplane FPV Racing Drone Plane Aircraft
Output Power : Continue Current 80A / Instantaneous Current 100A(not less than 10s)
Power Input : 2s-6s LiPo or 5-10 cells Ni-Cd batteries
BEC Output : 5V@5A (built-in switch regulater BEC)
Throttle Signal Frequency Refresh Rate : 50Hz—432Hz
Maximum motor speed: 210000 PRM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles)
Size : 86mm x 38mm x 12mm
Weight : 76g(with cooling chip)
Power protection, when it is powered on, no matter where the throttle stick on the remote tranmitter is, it won’t start the motor immediately, which can effectively avoid accidents.
Throttle Adjustment Function : adapt to the difference of different remote transmitters throttle stroke , improve the linearity of throttle response.
Program Setting Subjects(can be set by throttle joystick or LED parameter settng card)
a. Braking Setting : On/off
b. Battery Type : LiPo / Ni-Cd
c. Low Voltage Protection Mode : Soft turn off/ Tough turn off
d. Low Voltage Protection Threshold Value : low/medium/high
e. Start Mode : normal / soft / ultra soft and start
f. Timing : low/medium/high
a. Under-voltage protection : user can set it via program, when the battery voltage is lower than the protection value, the ESC will reduce the ouput power automatically.
b. Over-volatage protection : if the input voltage exceeds the allowed range, it will not start and will be into auto-protection mode , at the same time it emits beeping to alarm.
c. Over-heat protection : built-in temperature detection circuit, if the temperature is too high, it will reduce the output rate automatically.
d. Lost signal protection : if the remote transmitter lost the signal in 1 second, it will reduce the power output, if 2 seconds, it will turn off the power output.
1 x RC Brushless ESC 80A UBEC 2S-6S Electronic Speed Controller with BEC DIY Module for RC Airplane FPV Racing Drone Plane Aircraft