Holybro Kakute F7 Mini FC & Tekko32 F3 45A 4In1 Mini ESC & Atlatl HV Micro VTX FPV Combo Stack Flytower For FPV Racing RC Drone


Brand: Holybro
Item Name: Holybro Kakute F7 Mini FC & Tekko32 F3 45A 4In1 Mini ESC & Atlatl HV Micro VTX FPV Combo 

Holybro Kakute F7 mini Specification:

MCU: STM32F745VGH6 32-bit processor,216MHz, 320Kbytes RAM, 1Mbytes Flash
Baro: Yes
IMU: ICM20689 (SPI)
Barometer: BMP280
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
5.5 hardware UARTS (UART1,2,3,4,6,7)
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
Onbord 16Mbytes for Blackbox logging
5V Power Out: 1.0A max
3.3V Power Out: 0.2A max
Dimensions: 33x26x6mm
Mounting Holes: Standard 20mm square to center of holes 
Weight: 4g

Tekko32 F3 45A 4In1 Mini ESC Specification:
Con. Current: 45A
Peak Current: 50A
F3 MCU, runs double faster than F051
32bit ESC with BLHELI32 firmware
Supports 3-6S lipo inputPWM input, TLM supported
Voltage output (VBAT)
Supports oneshot / Multishot / Dshot PWM
Supports damped light
Ext. cap needed for 6s (470uf 35v for 6s usage.)
Mounting holes M2, 20x20mm
Size:30 x 36 mm
Weight: 7.8g

Atlatl HV Micro VTX Specification:
Brand Name: Holybro
Model: Atlatl HV micro V1.0
Item Name:  5.8G 40CH 25/200/500/800mW Switchable FPV Transmitter

Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW
Audio: 6.5 MHz Mono
Antenna Connector: MMCX
Input Voltage: 7 to 21 volts (2-4S LiPo) with absolute maximum 30 volts
Dimensions: 30x26x7mm
Mounting Holes: Standard 20mm square to center of holes
Weight: 3.6g


– Compatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.
– Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.
– SmartAudio input allows remote control by the flight controller.
  Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.
– All parameters are controllable via push-button on the side of the unit, for cases where SmartAudio is not used.
– MMCX connector is durable and easy to use. Rated for 100’s of mating cycles. Easy and quick antenna changes. No more ripped-off UFL connectors.
– LED indicators for channel, band, and power. Allows easy check of vTX parameters simply by glancing at the quad.
– Variable transmit power from 25 mW to 800 mW. Use 25 mW for a race and then easily switch to 800 mW for freestyle.
– 0.5 mW True Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.
– Built in microphone, so you can listen to your motors while you fly, no matter how far away you fly.
– Standard 26mm form factor allows you to mount the Atlatl directly on your flight controller stack.

Package Included:
1* Holybro Kakute F7 Mini FC & Tekko32 F3 45A 4In1 Mini ESC & Atlatl HV Micro VTX FPV Combo 

SKU: s1-1594455 Category: