EWRF e708TM3 5.8G 48CH 25mW/200mW/600mW Switchable FPV Transmitter Support OSD Configuring RC Drone


Description :  User Manual    OSD Setting   
Size : 32.5*22.6*7.25mm
Working Voltage : DC6-24V
Working Current : 130mA(25mW)/230mA(200mW)/280mA(600mW)/12V
Working Frequency : 5.8G
Working Channel : 48CH
Transmit Power : 25mW/200mW/600mW/Turn OFF adjustable
Transmit Distance :  200m(25mW)/1.5km(200mW)/5km(600mW), in open area with 4-leaf clover antenna
Interface :
1*RP-SMA ANT Connector
1*7P Socket (Video-in,GND,PMW-IN,Audio-in,5V-out,GND,Video-in)
Features :
Support parameter adjusted by Betaflight,fligth controller,OSD 
25mW/200mW/600mW and Turn-off (PITMODE) switchable
5V BEC output, support power for receiver and camera
0% inteference when power on and swtich channel, definitely won’t intefere others
With overheating auto protection, to prevent damge
With protective function that will not damage when forget to connect the antenna.
Support OSD configuring channel, power level and PITMODE mode switch 
Support PMW channel switch and PITMODE switch
Can save the power setting
Can lead out buttons to adjust the parameter out of the module
Mini Nixie tube displayer
Operation :
Power Switch
*Power on, power setting is same as last time you used.
*Long press Power Button,  switch among 25mW,200mW and 600mW circularly
*Short press Power Button twice,  turn on or turn off transmitting. “TX” indicator on is tranmitting, off is turon off(regardless of the other 2 LED)
*25mW works : “TX”on; 200mW works : “TX””200mW” 2 indicators on; 600mW works : 3 indicators all on
Channel Switch : 
*Long press Channel Botton, switch among A-B-C-D-E-F circularly, short press to switch CH1-CH8 circularly
*When connect PMW, there is signal in 3 seconds, the decimal point on displayer is lighting, you can use the remote control transmitter to configure 1-8 channels and turn off the transmitter; Otherwise, it will enter the button configuring mode aftger 3 seconds, the decimal points won’t show up.
*Can lead out the configuring button for setting, there is bonding pad for button on module.
Note :  
Had better connect the antenna before you power on it, can pretect the module.
2. 5V voltage input, the max current is 1A.
Package Included  :
1 x 5.8G 48CH 25mW/200mW/600mW FPV Transmitter
SKU: s1-1158300 Category: